Swimming freely the head of the floating strainer will sink about 15cm deep into
the water and suck in the middle, mostly clean layer of water.
Mud and sand from the ground and flotsam from the surface area will not be able to
reach the floating suction strainer.
Fire protection pond: The mud layer at the bottom of the pond will not be churned
up in order to avoid continuous clogging of the suction head.
Because of its large suction strainer it is also possible to use the S50 on or between
Rivulets: Using this model will allow you to get water out of the smallest watercourses.
On a gravelly ground only a few centimetres of water
depth will be enough. Building time-expensive dams or digging holes will no longer
Pumping out cellars: Big amounts of water can be handled quickly down to only a few
The floating body is made of indestructible Polyethylen, the strainer of A2-stainless
steel perforated plate.
Developed and produced in St. Pankraz, Austria
Floating strainer S50
weight: ~ 7kg measurements: 570x380x200 mm
connection standard: Storz A 110mm coupling
also available with any other coupling between 100mm and 125mm
price: 565.- incl. VAT
Floating strainer S20
weight: ~ 3kg measurements: 410x260x190 mm
connection: Storz B 75mm, Storz C 52mm
price: 490.- Incl. VAT